You are here:   Home  > Nokia >  Nokia 3210  > Inside 3210 V1 >  Sim side  

 

 

 

 
  1. Ceramic filter 1842.5MHz +/- 37.5MHz
  2. Epcos B4693 SAW RF filter; Fc = 1842.5MHz, Bandwidth 90MHz
  3. VCO 464MHz
  4. FDK: VCO 1942-2067MHz
  5. Ceramic filter 13MHz +/- 0.09MHz
  6. PCB pads to the bottom connector and microphone
  7. MNP4370351: Summa: including PLL, AGC amplifier, I/Q modem
  8. EPCOS; SAW filter 71MHz +/- 90kHz
  9. SAW filter; 232MHz +/- 0.5MHz
  10. Infineon PMB2353 radio
  11. Murata; SAW filter 947.5MHZ +/-12.5MHz, used in Rx path after the LNA output
  12. Epcos SAW filter B4677 range 890-915MHz (fc = 902.50), used in Tx path before the Power amplifier input.
  13. Hitachi PF01420B: Power amplifier for GSM
  14. Murata K1747: RF Diode SW with Integrated LPF.
    Frequency Range (Tx): 1747.5MHz (ft)±37.5MHz
    Frequency Range (Rx): 1842.5MHz ±37.5MHz
  15. SIM connector
  16. Vibrator PCB pads (!)
  17. Philips Semiconductors TEA1210TS DC/DC convertor.
  18. NMP70393 Multi functional power management IC, SIM controller, RTC, watchdog
  19. 32.768 kHz crystal
  20. Nokia 11L203 Power Management Device
  21. Antenna connector
  22. DC/DC convertor coil
  23. Epcos B4109; SAW filter 1747.5MHZ +/- 37.5MHz
  24. Hitachi PF0411B: Power amplifier for DCS
  25. Epcos B4409; SAW filter 1747.5MHZ +/- 37.5MHz

[Alcatel] [Bosch] [Ericsson] [Motorola] [Nokia] [Panasonic] [Philips] [Sagem] [Siemens] [Sony] [Base stations] [Extras] [Miscellaneous]

Page last updated: 01/12/02  

 

   

     

 

 

 

Hosted by uCoz